Yamaha
Acetal Frame Slider Yamaha ’94-’07 YZF-600
The frame sliders are to be mounted to your rearmost engine
mounts. Refer to your service manual before performing this
installation. Before beginning, make sure pinch bolts are
tight to prevent any engine movement. Remove the rearmost
engine mount bolt from the right side. Replace with the longer
bolt supplied with frame slider. Repeat this on the left side
with the short bolt supplied and torque to factory specifications.
DO NOT OVERTIGHTEN.
Includes: (2) Acetal pucks with aluminum bushings
(1) 10mm x 1.25 x 80mm bolt (short puck)
(1) 10mm x 1.25 x 70mm bolt (long puck)
*Must cut Fairings on '96 YZF-600
