TagLine Here

Frame Sliders FP-45





  • 99-00ZRX-1100
  • 01-05ZRX-1200

The frame sliders are mounted to the upper engine mounts.
The fairings require modification during installation. This is
best done by first removing the fairing. Locate the engine
mount bolt & replace with the supplied bolt. If heat shield foam
is not present, apply playdough to inside fairing where cutting
will take place. Put the fairing back and see where the bolt head
has left an impression in playdough/heat foam. This is the
center of the hole to be drilled. Mask outside of fairing with
tape to prevent chipping during drilling. Take 2" hole saw and
center around bolt head impression in playdough. Drill through
fairing. Lightly file down rough edges around hole. Install
slider and replace the fairings.


Includes: (2) Acetal pucks with aluminum bushings
  (2) 10mm x 1.25x 90mm
  (2)10mm x 30mm(mounts slider to bracket)
  (2) Mounting brackets

Add to Cart:

Please Choose: