TagLine Here

Frame Sliders - Acetal

Pro-tek frame sliders are made from an acetal resin for strength and durability Helps protect your frame from nasty spills and tip overs. Some applications require cutting of fairings. Comes complete with instructions for easy installation. Comes with all mounting hardware. Frame sliders are not designed to protect the plastics, rearsets (footpegs), or clipons (handlebars). They are designed to absorb the impact and energy of a fall so that you don't damage your engine or frame. Those two parts of the bike are critical components for racers and an insurance company as they will often total your bike if those are damaged. Frame sliders come in two basic models which are cut or no cut frame sliders. A cut frame slider means that you have to cut your plastics to be able to bolt that type of frame slider on to your bike. No cuts obviously mean you do not have to cut a hole in your plastics. We like each model to have to cut a 2" hole in your plastics and other kits with no modifications you do not have to cut anything. The no cut kit normally has brackets that you mount up below your plastics that then go to a place where there are no plastics then you bolt on the slider to that plate. Basically the plate lets you relocate where the slider will bolt on. No cut sliders are also more expensive. Now for quick bullet points about sliders: 

1. They are not designed to protect plastics, clipons, or rearsets, even though they might help sometimes.
2. You do not want a slider to stick out too far or it will help flip your bike in a crash by snagging on the ground, curb or anything else. 
3. You want delrin or plastic to touch down when you crash as they will grind off and not catch on anything and if hit hard enough or direct enough they will shatter. 
4. If your slider shatters, grinds off or bends then it did it's job. You don't want it solid after a crash or it didn't absorb any energy but merely transfered it on to what you bolted it to.
5. When f1 cars hit the side of a track they explode as they don't want the drive to absorb the energy. Frame sliders are the same way. You want them to stay attached but get beat up and take the energy.
6. If the bolt on a frame slider bends that's a good thing as the only other option is to put the energy on the frame or mounting point. Better the bolt bends. Also if it didn't bend it might have flip the bike by snagging something. A mangled frame slider, but still on the bike, did it's job. 
7. No cut frame sliders aren't a direct bolt on like cut sliders as they often have a bracket. We hope this information was helpful and if you have anything to add or questions then feel free to contact us. Ride safe and hope you never have to use your frame sliders.

Product Image Item Name- Price
Frame Sliders FP-275

Frame Sliders FP-275

    Yamaha ’07-’08 YZF-1000 R-1 The frame sliders are to be mounted to your upper engine mount bolts.  Refer to your service manual...
$129.95

... more info

Frame Sliders FP-300

Frame Sliders FP-300

      Honda ’07-’08 CBR-600RR The frame sliders are mounted to the upper engine mounts.  Both fairings require modification during...
$61.95

... more info

Frame Sliders FP-350

Frame Sliders FP-350

      Kawasaki ’06-’11 ZX-14R The frame sliders are to be mounted to your upper engine mount bolts.  Refer to your service manual before...
$109.95

... more info

Frame Sliders FP-400

Frame Sliders FP-400

      Kawasaki ’06-’08 EX-650R Ninja Remove the right side fairing panel, then remove the lower front bolt that holds engine mount bracket to...
$129.95

... more info

Frame Sliders FP-410

Frame Sliders FP-410

Kawasaki '09-'11 Ninja 650R
$129.95

... more info

Frame Sliders FP-450

Frame Sliders FP-450

    Kawasaki ’03-’06 Z-1000 The frame sliders are to be mounted to your upper engine mount bolts.  Refer to your service manual before...
$109.95

... more info

Frame Sliders FP-455

Frame Sliders FP-455

Kawasaki ’03-’06 Z-750 The frame sliders are to be mounted to your upper engine mount bolts. Refer to your service manual before performing this...
$109.95

... more info

Frame Sliders FP-500

Frame Sliders FP-500

    Yamaha ’06-’13 FZ-1 The frame sliders are to be mounted to your upper engine mount bolts.  Refer to your service manual before...
$61.95

... more info

Frame Sliders FP-550

Frame Sliders FP-550

    Kawasaki ’08-’10 ZX-10R The frame sliders are to be mounted to your upper engine mount bolts.  Refer to your service manual before...
$61.95

... more info

Frame Sliders FP-600

Frame Sliders FP-600

    Suzuki ’08-’13 GSX-1300R Hayabusa The frame sliders are mounted to the upper engine mounts.  The fairings require modification...
$61.95

... more info

Frame Sliders FP-650

Frame Sliders FP-650

    Honda ’08-’13 CBR-1000RR The frame sliders are mounted to the upper engine mounts.  The fairings require modification during...
$61.95

... more info

Frame Sliders FP-700

Frame Sliders FP-700

    Yamaha ’08-’13 YZF-600 R-6 The frame sliders are to be mounted to your upper engine mountbolts.  Refer to your service manual...
$109.95

... more info

Frame Sliders FP-750

Frame Sliders FP-750

      Honda ’09-'12 CBR-600RR The frame sliders are mounted to the top engine mounts.  The fairings require modification during...
$61.95

... more info

Frame Sliders FP-800

Frame Sliders FP-800

    Honda ’02-’07 CB-919/900F
$61.95

... more info

Frame Sliders FP-850

Frame Sliders FP-850

    Honda ’08-’11 CB-1000R FP-850 '08-'11 CB-1000R Acetal Frame Sliders The Frame sliders are mounted to the upper engine mount bolts.  ...
$61.95

... more info


Copyright © 2017 Pro-Tek High Performance Motorcycle Parts. Powered by Zen Cart
Parse Time: 0.367 - Number of Queries: 327 - Query Time: 0.23039527484131